When you pour concrete footings, hold the cardboard concrete form tube about 12 in. up from the bottom of the footing. Do this by nailing the sides of the tube to the center of a tic-tac-toe grid ...

The bottom of the footing needs to be below the frost depth. It's always a great idea to go just a little deeper than recommended. Sign up for Best Bets, your go-to planner for things to do on LI ...

3.8.6 – The dowels should extend at least 12 in. (300 mm) above the top of the footing, and 6 in. (150 mm) into the footing. If the depth of the footing is not adequate to develop a straight bar ...

Footings, in essence, are large blocks of poured-in-place concrete set underground that connect a building's structure to the earth below. Before you pour anything, you must consider the frost line.

Concrete footing forms should be made from sturdy 2-by-8s or 2-by-10s. Many foundation contractors prefer to use 2-by-8’s and stake them up off the ground several inches.

Usually, a 6- or 8-inch thick, 2-foot diameter poured concrete pad below the frost depth is sufficient to distribute the weight of the deck. There are all sorts of ways to install a deck ...

Usually, a 6- or 8-inch thick, 2-foot diameter poured concrete pad below the frost depth is sufficient to distribute the weight of the deck. There are all sorts of ways to install a deck ...

Typically, we excavate native soils to the proper depth, then place a steel reinforced concrete footing on the ground. This footing should function much like a snowshoe displacing the building ...