This work shows that multi-DOF metamaterials are limited by their energy-driven deformation, restricting their mechanical ...

Young’s modulus, also known as the modulus of elasticity, is a crucial material property that defines the stiffness of a ...

Stress-strain curves estimated from properties measured by instrumented indentation at 500mN. The simulated force-displacement curves are plotted in Figure 5, together with typical experimental ...

The entire stress-strain curve can now be determined using nanoindentation with a flat-ended cylindrical punch and novel analysis of the resulting force-displacement data 1. Unlike pyramidal indenters ...

Stress-strain curves for nonbrittle plastics go through an inflection or local maximum ... MAT24 either underpredicts the stiffness at low strain rates or overpredicts stiffness at ...

This article highlights the importance of assessing the tensile properties of adhesives through testing and simulation which are crucial for determining their suitability for various applications and ...

The SS curve reveals that the 2.3% strain value is below the significant transition (yield) at 32.4 MPa (4,700 psi). It is important that the force of assembly not exceed this value.

Typical stress-strain curves of concrete ... Fig. 1 illustrates the results of further study into the effect of active bending moments on changes in stress and stiffness of 42-in. OD × 0.875-in ...

1f the sample is relaxed before failure occurs the return stress strain curve follows closely the outward path, i.e. almost all the energy absorbed by the sample is returned on relaxation. This low ...